Vent-Tel is a non-invasive and fail-safe burst detection system. Operating via a simple N/O reed switch and magnet technology, the detector can trigger a safe and rapid shutdown of the process should an overpressure event occur.
When fitted to explosion panels, Vent-Tel provides an instantaneous signal of panel actuation within any application.
Being non-invasive, Vent-Tel is not susceptible to process change or false signals and does note affect the panel’s performance. Vent-Tel can also be retrofitted to our range of explosion panels. Vent-Tel is intrinsically safe when installed according to the specifications. It is ATEX approved to category II 1 GD EEx ia IIC and carries the EC-Type Examination Certificate ITS19ATEX204880X.
Vent-Tel can be supplied integral to the vent or retrofitted to an existing installation.